Add this Progressive Adapter to your Reloading Equipment will allow you to mount the popular Quick Measure on any progressive reloading press that uses the standard 7/8-14 thread. This solves several problems related to dumping powders with the existing powder measures used 0n progressive presses.
The Quick Measure employs the use of interchangeable charge tubes to allow for quick changes in powder charges (30 seconds is typical). It also will allow for the use of long extruded powders like 4831 and 4350. With our innovative bridge breaker, any bridging of powder will be easily alleviated without causing the typical mess
The adapter main assembly includes the following:
1 - 7/8-14 thread mounting die,
1- mounting bracket with vertical adjustment sleeve,
3 - sleeves to adjust for cartridge length,
1 - set of drop tubes
1 - Standard Funnel: your choice
charges from 28 grains to 120 gr. The drop tubes are available at $30.00 each: Extra die bodies are available for $25.00 each Bridges Breaker are available for $ 5.00 each
Standard Funnel: charges from 28 grains to 120 grains
Small Charge Funnel: charges from 3 grains to 30 grains
Small: 17 to 20 caliber
Medium: 22 to 243 caliber
Large: all calibers above 243
Have you opened a new location, redesigned your shop, or added a new product or service? Don't keep it to yourself, let folks know.
Use this to prevent powder bridging. just hang it from the adjusting screw on the charge tube to eliminate powder bridging.
JOHNSON DESIGN SPECIALTIES
4607 West Elderberry Avenue, Spokane, Washington 99208, United States
Made in USA
For drop down menu click on the three bars in the upper left corner